Hello everyone
I am H. Djilali
I bought a myRIO 1900 card second hand; this card has been used on linux
For my project I work on windows 10 and labVIEW 2014 the problem during the execussion the card gives an error message on real-time target, then I tried to make the update but I do not have the code to access this operation, someone can help me and thank you.
myRIO with LabVIEW 2014 and windows 10
-
- professor
- Сообщения: 3507
- Зарегистрирован: 31 июл 2011, 23:05
- Награды: 2
- Версия LabVIEW: 12-18
- Благодарил (а): 54 раза
- Поблагодарили: 186 раз
- Контактная информация:
Re: myRIO with LabVIEW 2014 and windows 10
What map?
What error?
what are you trying to update?
LabVIEW 2014 does not support Win10, try using LabVIEW 2015+
What error?
what are you trying to update?
LabVIEW 2014 does not support Win10, try using LabVIEW 2015+
-
- interested
- Сообщения: 2
- Зарегистрирован: 26 май 2024, 13:13
- Версия LabVIEW: 2014
- Контактная информация:
Re: myRIO with LabVIEW 2014 and windows 10
SALAM to All;
I bought the myRIO1900 card from a third party and it seems to work under Linux.
When I wanted to run it under Windows and during execution the card stopped and sent an error message, the message says "The real-time target is not compatible with LabVIEW for PC host..."
Using NIMAX it is possible to refresh by changing the country and time, but I don't have the code to access the system and refresh.
The question is how to get the code?
Is there any other solution other than re-updating?
Thank.
I bought the myRIO1900 card from a third party and it seems to work under Linux.
When I wanted to run it under Windows and during execution the card stopped and sent an error message, the message says "The real-time target is not compatible with LabVIEW for PC host..."
Using NIMAX it is possible to refresh by changing the country and time, but I don't have the code to access the system and refresh.
The question is how to get the code?
Is there any other solution other than re-updating?
Thank.
Последний раз редактировалось hamri 27 май 2024, 02:06, всего редактировалось 1 раз.
-
- professor
- Сообщения: 3507
- Зарегистрирован: 31 июл 2011, 23:05
- Награды: 2
- Версия LabVIEW: 12-18
- Благодарил (а): 54 раза
- Поблагодарили: 186 раз
- Контактная информация:
Re: myRIO with LabVIEW 2014 and windows 10
The myRIO system also has LabVIEW libraries of a certain version.
It seems that you have a different version on your computer. You need to update the myRIO firmware via NI MAX.
If you have LabVIEW + realtime + FPGA or add-on for myRIO on your computer, there should be files for updating the system.
It seems that you have a different version on your computer. You need to update the myRIO firmware via NI MAX.
If you have LabVIEW + realtime + FPGA or add-on for myRIO on your computer, there should be files for updating the system.
-
- interested
- Сообщения: 2
- Зарегистрирован: 26 май 2024, 13:13
- Версия LabVIEW: 2014
- Контактная информация:
Re: myRIO with LabVIEW 2014 and windows 10
I need a code to access the update system, because this card was bought second-hand.Artem.spb писал(а): ↑27 май 2024, 04:16 The myRIO system also has LabVIEW libraries of a certain version.
It seems that you have a different version on your computer. You need to update the myRIO firmware via NI MAX.
If you have LabVIEW + realtime + FPGA or add-on for myRIO on your computer, there should be files for updating the system.
Is there a trick to access the update system?
Последний раз редактировалось hamri 27 май 2024, 21:54, всего редактировалось 1 раз.
-
- professor
- Сообщения: 3507
- Зарегистрирован: 31 июл 2011, 23:05
- Награды: 2
- Версия LabVIEW: 12-18
- Благодарил (а): 54 раза
- Поблагодарили: 186 раз
- Контактная информация:
-
- interested
- Сообщения: 2
- Зарегистрирован: 26 май 2024, 13:13
- Версия LabVIEW: 2014
- Контактная информация:
Re: myRIO with LabVIEW 2014 and windows 10
I bought this card second-hand and through an intermediary, because international bank cards don't exist in my country. That's why I have no contact with the seller.
-
- Похожие темы
- Ответы
- Просмотры
- Последнее сообщение